Tall platform bed frame – Platform beds are known for their minimalist style. They are typically low on the floor without a headboard or footboard. Because they are simple in nature, platform beds are also easy to do-it-yourselfers do router works, or woodwork complex just basic that anyone with a little knowledge and a drill can achieve together. If you take the dimensions of the timber yard, staff can size timber for you and make the project even simpler.
Sand wood cut four lengths of 2 by 10 inches to 70 inches and three lengths of 1-inch plywood cut thick 30 inches by 90 inches for a tall platform bed frame. Varnish or paint components before assembling the bed and drying them according to the recommended times on the label paint or varnish drying.
12 Picture Gallery: Diy Tall Platform Bed Frame
Place the four lengths of wood 2 inches by 10 inches 26 separate, but parallel to each other. You must rest on a border of 2 inches, with about 70 inches between the two external tables. Place the sheet of plywood through tables 2 by 10 inches with all its ends flush. The ends of the plywood should be extended in the outer two tables 2 by 10 inches by 10 inches from each end.
2 inch wood screws through the top of the tall platform bed frame plywood timber 2 by 10 inches below each 5 inches along the length of each board 2 by 10 inches to ensure together the platform bed. Place the queen mattress platform focused on plywood to finish the bed.
This post topic: Bed Frame Ideas